Difference between revisions of "JSX-C"
From MSX Game Library
(→Protocol) |
|||
| (11 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
Proposal for a protocol to handle joypads with a '''variable number of sticks and buttons''', plug in the MSX’s '''[https://www.msx.org/wiki/General_Purpose_port general purpose port]'''. | Proposal for a protocol to handle joypads with a '''variable number of sticks and buttons''', plug in the MSX’s '''[https://www.msx.org/wiki/General_Purpose_port general purpose port]'''. | ||
| − | This protocol can manage joypads with up to '''15 analog axis''' (one stick requires 2 axis) and '''18 buttons'''. | + | This protocol can manage joypads with up to '''15 analog axis''' (one stick requires 2 axis) and '''18 buttons''' (3 rows of 6 buttons each). |
Pin 8 is used to synchronize data transmission: | Pin 8 is used to synchronize data transmission: | ||
* Leaving Pin 8 LOW for long enough (>1 ms, about 3580 t-states) resets the joystick's internal counter, | * Leaving Pin 8 LOW for long enough (>1 ms, about 3580 t-states) resets the joystick's internal counter, | ||
* then successive pulses on Pin 8 (LOW > HIGH) are used for data transmission (6 bits per 6 bits). | * then successive pulses on Pin 8 (LOW > HIGH) are used for data transmission (6 bits per 6 bits). | ||
| + | |||
| + | Pin 6 and 7 are used as input only. | ||
Internal counter is used to send successive data: first the device ID, then each of the input data. | Internal counter is used to send successive data: first the device ID, then each of the input data. | ||
| + | |||
| + | Pin binding for received 6-bit data when reading through R#14: | ||
| + | <syntaxhighlight> | ||
| + | 7 6 5 4 3 2 1 0 | ||
| + | --------------- | ||
| + | 0 0 P P P P P P | ||
| + | │ │ │ │ │ └── Pin 1 | ||
| + | │ │ │ │ └──── Pin 2 | ||
| + | │ │ │ └────── Pin 3 | ||
| + | │ │ └──────── Pin 4 | ||
| + | │ └────────── Pin 6 | ||
| + | └──────────── Pin 7 | ||
| + | </syntaxhighlight> | ||
== States == | == States == | ||
| Line 31: | Line 46: | ||
Read R#14 | Read R#14 | ||
| − | : 6-bit data | + | : Get 6-bit data |
| + | : Increment the internal counter | ||
| − | Pin | + | Write R#15 |
| − | + | : Pin 8: LOW | |
| − | |||
| − | |||
| − | |||
| − | |||
==== Device ID ==== | ==== Device ID ==== | ||
| Line 44: | Line 56: | ||
First received data is the JSX device ID: | First received data is the JSX device ID: | ||
<syntaxhighlight> | <syntaxhighlight> | ||
| − | + | 7 6 5 4 3 2 1 0 | |
| − | + | --------------- | |
| − | + | 0 0 A A A A B B | |
| − | + | │ │ │ │ └─┴── Number of button rows (0-3) | |
| − | + | │ │ │ │ 0: No button | |
| − | + | │ │ │ │ 1: Up to 6 buttons | |
| − | + | │ │ │ │ 2: Up to 12 buttons | |
| − | + | │ │ │ │ 3: Up to 18 buttons | |
| − | + | └─┴─┴─┴────── Number of axis (0-15) | |
</syntaxhighlight> | </syntaxhighlight> | ||
<u>Note</u>: Number of axis or number of button rows can be zero, but not both. So any device ID up to 0x3F is valid except 0x00. | <u>Note</u>: Number of axis or number of button rows can be zero, but not both. So any device ID up to 0x3F is valid except 0x00. | ||
| Line 65: | Line 77: | ||
==== Axis data ==== | ==== Axis data ==== | ||
| − | |||
| − | |||
Get 6-bit values | Get 6-bit values | ||
| − | : | + | : unsigned 6-bits value [0:63] |
| − | |||
==== Button row data ==== | ==== Button row data ==== | ||
| − | |||
| − | |||
Get 6-bit values | Get 6-bit values | ||
| − | + | : bits field for 6 boutons (0: pressed, 1: released) | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
== Example == | == Example == | ||
For a Joypad with a stick with X and Y axis (2 axis), and 4 buttons (1 row), the reading process would be: | For a Joypad with a stick with X and Y axis (2 axis), and 4 buttons (1 row), the reading process would be: | ||
* After starting communication, first read to R#14 return the ID.<br/>ID: 0x09 [00 0010 01] for 2 axis, and 1 buttons row, | * After starting communication, first read to R#14 return the ID.<br/>ID: 0x09 [00 0010 01] for 2 axis, and 1 buttons row, | ||
| − | * Next reading give X-axis value [ | + | * Next reading give X-axis value [0:63], |
| − | * Next reading give Y-axis value [ | + | * Next reading give Y-axis value [0:63], |
* Next and last reading give button states (for up to 6 boutons). | * Next and last reading give button states (for up to 6 boutons). | ||
| − | [[File: | + | [[File:Jsx-c.png|512px]] |
Note: [https://www.msx.org/wiki/MSX-HID MSX-HID] fingerprint would be: 0Fh, 09h, 0Fh | Note: [https://www.msx.org/wiki/MSX-HID MSX-HID] fingerprint would be: 0Fh, 09h, 0Fh | ||
[[Category:Proposal]][[Category:Proposal/Protocol]] | [[Category:Proposal]][[Category:Proposal/Protocol]] | ||
Latest revision as of 15:14, 4 November 2024
Contents
Protocol
Proposal for a protocol to handle joypads with a variable number of sticks and buttons, plug in the MSX’s general purpose port.
This protocol can manage joypads with up to 15 analog axis (one stick requires 2 axis) and 18 buttons (3 rows of 6 buttons each).
Pin 8 is used to synchronize data transmission:
- Leaving Pin 8 LOW for long enough (>1 ms, about 3580 t-states) resets the joystick's internal counter,
- then successive pulses on Pin 8 (LOW > HIGH) are used for data transmission (6 bits per 6 bits).
Pin 6 and 7 are used as input only.
Internal counter is used to send successive data: first the device ID, then each of the input data.
Pin binding for received 6-bit data when reading through R#14:
7 6 5 4 3 2 1 0
---------------
0 0 P P P P P P
│ │ │ │ │ └── Pin 1
│ │ │ │ └──── Pin 2
│ │ │ └────── Pin 3
│ │ └──────── Pin 4
│ └────────── Pin 6
└──────────── Pin 7
States
Idle state (no-communication)
Write R#15
- Pin 8: LOW (for >1 ms)
- Reset internal data counter
Read R#14
- Get 0x0F (JSX idle fingerprint)
- Note: It could be any value between 00-3F not already return by other MSX devices)
Communication state
Write R#15
- Pin 8: LOW
Write R#15
- Pin 8: HIGH (request data)
Read R#14
- Get 6-bit data
- Increment the internal counter
Write R#15
- Pin 8: LOW
Device ID
First received data is the JSX device ID:
7 6 5 4 3 2 1 0
---------------
0 0 A A A A B B
│ │ │ │ └─┴── Number of button rows (0-3)
│ │ │ │ 0: No button
│ │ │ │ 1: Up to 6 buttons
│ │ │ │ 2: Up to 12 buttons
│ │ │ │ 3: Up to 18 buttons
└─┴─┴─┴────── Number of axis (0-15)
Note: Number of axis or number of button rows can be zero, but not both. So any device ID up to 0x3F is valid except 0x00.
Input number can be computed as:
- Axis number (Axies): ID >> 2,
- Button rows (BtnRow): ID & 0x03,
- Total input number (TotIn): Axies + BtnRow.
Repeat data read, for each axis (if any), then for each button row (if any). The device must be read TotIn times to read all data.
Axis data
Get 6-bit values
- unsigned 6-bits value [0:63]
Button row data
Get 6-bit values
- bits field for 6 boutons (0: pressed, 1: released)
Example
For a Joypad with a stick with X and Y axis (2 axis), and 4 buttons (1 row), the reading process would be:
- After starting communication, first read to R#14 return the ID.
ID: 0x09 [00 0010 01] for 2 axis, and 1 buttons row, - Next reading give X-axis value [0:63],
- Next reading give Y-axis value [0:63],
- Next and last reading give button states (for up to 6 boutons).
Note: MSX-HID fingerprint would be: 0Fh, 09h, 0Fh