NEO mapper/Extension2

⚠️ This page is still in the proposal stage and should not yet be considered an official specification.

Proposal for an extension to the NEO mapper format.

Specifications

Principles

Any write operation to the NEO mapper with address bits 10-12 set to 0 is considered as access to extended features. In that case, the mapper bank register is not modified.

All other write operations should be considered normal access to the mapper's bank register.

The address contains an 8-bit function ID, and a 3-bit destination bank value for function to be applied to a given mapper's bank.

ADDRESS 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Page 0 0 0 Bank 0 0 0 0 Function

DATA 7 6 5 4 3 2 1 0 Parameter

Functions

0x00: ROM mapper

Activate access to the cartridge ROM mapper through the given bank (default mode)

Parameter:

8	7	6	5	4	3	2	1
0	0	0	0	0	0	0	0

0x01: Cartridge information

Activate read access to the cartridge information data through the given bank (8 KB mirrored on NEO-16)

Parameter:

8	7	6	5	4	3	2	1
0	0	0	0	0	0	0	0

0x03: RAM

Activate read/write access to RAM through the given bank

Parameter:

8	7	6	5	4	3	2	1
RAM segment

0x04: SRAM/FRAM

Activate read/write access to SRAM/FRAM through the given bank (8 KB mirrored on NEO-16)

Parameter:

8	7	6	5	4	3	2	1
0	0	0	0	Segment

0x07: SCC/SCC+

Activate SCC to be accessed through memory area from 9800h to 9FFFh (4 KB mirrored) Any bank number is valid, but bank #4 is recommanded for NEO-8 and #2 for NEO-16 to use standard address for

8	7	6	5	4	3	2	1
C	0	0	0	0	0	0	0

• C: 0=SCC, 1=SCC+

Appendix

Programmable processor and emulation

Here is a pseudo code in C to handle NEO mappers extension for programmable processor based cartridges or for emulators:

NEO-16 mapper:

#define BANK_NUM				3
#define BANK_SIZE				(16 * 1024)
#define ROM_SEG_NUM				1024
#define ROM_SEG_MASK			(ROM_SEG_NUM - 1)
#define ROM_SIZE				(ROM_SEG_NUM * BANK_SIZE)
#define FUNC_NUM				16

// Extended function prototypes
typedef void (*funcInit_t)();
typedef void (*funcSelect_t)(uint8, uint8);
typedef void (*funcWrite_t)(uint16, uint8);
typedef uint8 (*funcRead_t)(uint16);

// Supported extended functions
void initMapper();
void initInfo();
void initRAM();
void initSRAM();

// Extended functions table
funcSelect_t funcSelectTable[FUNC_NUM];
funcWrite_t funcWriteTable[BANK_NUM];
funcRead_t funcReadTable[BANK_NUM];

//=============================================================================
// NEO-16 Interface
//=============================================================================

// Handle device initialization
void NEO16_Init()
{
	initMapper();
	initInfo();
	initRAM();
	initSRAM();
}

// Handle write access
void NEO16_Write(uint16 address, uint8 data)
{
	uint8 bank = ((address >> 12) & 0x03) - 1; // Get the corresponding bank number
	if (bank < BANK_NUM)
	{
		funcWriteTable[bank](address, data);
	}
	else // Extended function
	{
		uint8 funcId = address & 0xFF; // Get function ID
		bank = (address >> 8) & 0x07; // Get destination bank
		if ((bank < BANK_NUM) && (funcSelectTable[funcId] != NULL)) // Is function supported?
			funcSelectTable[funcId](bank, data); // Initialize function specific code
	}
}

// Handle read access
uint8 NEO16_Read(uint16 address)
{
	uint8 bank = address >> 14; // Get the corresponding bank number
	if (bank < BANK_NUM)
		return funcReadTable[bank](address);

	return 0xFF; // skip
}

//=============================================================================
// Function 0x00 - ROM Mapper
//=============================================================================

// ROM data
extern const uint8* romData; 

// Bank switching register value
uint16 romSegment[BANK_NUM];

void writeMapper(uint16 address, uint8 data)
{
	if (address & 1) // Set bank register MSB
		romSegment[bank] = ((data & 0x0F) << 8) | (romSegment[bank] & 0x00FF);
	else // Set bank register LSB
		romSegment[bank] = (romSegment[bank] & 0xFF00) | (data);
}

uint8 readMapper(uint16 address)
{
	return romData[(romSegment[bank]) << 14 + (address & 0x3FFF)];
}

void selectMapper(uint8 bank, uint8 data)
{
	funcWriteTable[bank] = writeMapper;
	funcReadTable[bank] = readMapper;		
}

void initMapper()
{
	for (uint8 i = 0; i < BANK_NUM; i++)
	{
		romSegment[i] = 0x0000;
		selectMapper(i, 0);		
	}
	funcSelectTable[0] = selectMapper;
}
	
//=============================================================================
// Function 0x01 - Cartridge Information
//=============================================================================

struct info
{
	char	Sign[3];
	uint8	Version;
	uint8	Flag;
	uint8	_reserved1;
	uint16	SegmentNum;
	uint8	_reserved2[8];
	uint8	Functions[FUNC_NUM]; // Must be different from 0 for supported functions 
};

const struct infoData = 
{
	{ 'N', 'E', 'O' },
	0x13, // Version 1.3
	0x01, // NEO-16
	0,
	ROM_SEG_NUM, // 1204 segments (16 MB)
	{ 0, 0, 0, 0, 0, 0, 0, 0 },
	{
		1, // Mapper
		1, // Info
		0,
		32,	// RAM
		32, // SRAM/FRAM
		0,
		0,
		0, // SCC
		0,
		0,
		0,
		0,		
		0,
		0,
		0,
		0,
	},
};

void writeInfo(uint16 address, uint8 data) {}

uint8 readInfo(uint16 address)
{
	uint8 index = address & 0xFF; // mirrored every 256 bytes
	if (index > sizeof(info))
		return 0;
	return ((const uint8*)&infoData)[index]; 
}

void selectInfo(uint8 bank, uint8 data)
{
	funcWriteTable[bank] = writeInfo;
	funcReadTable[bank] = readInfo;		
}

void initMapper()
{
	funcSelectTable[1] = selectInfo;
}

//=============================================================================
// Function 0x03 - RAM
//=============================================================================

#define RAM_SEG_NUM				32
#define RAM_SEG_MASK			(RAM_SEG_NUM - 1)

// RAM data
uint8 ramData[16 * 1024 * RAM_SEG_NUM]; // 32 * 16 KB = 512 KB

// Bank switching register value
uint8 ramSegment[BANK_NUM];

void writeRAM(uint16 address, uint8 data)
{
	ramData[(ramSegment[bank]) << 14 + (address & 0x3FFF)] = data;
}

uint8 readRAM(uint16 address)
{
	return ramData[(ramSegment[bank]) << 14 + (address & 0x3FFF)];
}

void selectRAM(uint8 bank, uint8 data)
{
	ramSegment[bank] = data & RAM_SEG_MASK;
	funcWriteTable[bank] = writeRAM;
	funcReadTable[bank] = readRAM;		
}

void initRAM()
{
	for (uint8 i = 0; i < BANK_NUM; i++)
		ramSegment = 0;
	funcSelectTable[3] = selectRAM;
}

//=============================================================================
// Function 0x04 - SRAM
//=============================================================================

#define SRAM_SEG_NUM			16
#define SRAM_SEG_MASK			(SRAM_SEG_NUM - 1)

// SRAM data
uint8 sramData[8 * 1024 * SRAM_SEG_NUM]; // 16 * 8 KB = 128 KB

// Bank switching register value
uint8 sramSegment[BANK_NUM];

void writeSRAM(uint16 address, uint8 data)
{
	sramData[(sramSegment[bank]) << 13 + (address & 0x1FFF)] = data;
}

uint8 readSRAM(uint16 address)
{
	return sramData[(sramSegment[bank]) << 13 + (address & 0x1FFF)];
}

void selectSRAM(uint8 bank, uint8 data)
{
	sramSegment[bank] = data & SRAM_SEG_MASK;
	funcWriteTable[bank] = writeSRAM;
	funcReadTable[bank] = readSRAM;		
}

void initSRAM()
{
	for (uint8 i = 0; i < BANK_NUM; i++)
		sramSegment = 0;
	funcSelectTable[4] = selectSRAM;
}